Patient care trolley type PFW
professional patient CARE trolley for care homes
- 1 disinfectant dispenser type USP-O*
- 1 disposable glove dispenser type HSS-2*
Latest Products
Latest Products in our range of products
Stage-work table Highline, Type SAD-H
ERGONOMIC STAGE WORK TABLE MADE OF HYGIENIC ROUND tube
- Fully welded execution made of stainless steel
- Stainless tabletop with 3-sided rear upstand to the step (100 mm) in 1.5 mm material thickness
- Table top, underneath reinforced with surrounding square tube profile frame
Boot cleaning module Boot-Master type BM-M
Laterally extendable module for additional boot hygiene
- Module for lateral extension of the Highline personnel hygiene stations, e.g. check-in station
- Two vertically rotating brush rollers (Ø 280 mm) for cleaning the upper and upper leather
- Designed without sole cleaning brush!
Pallet truck type GHW-W 100%
The stainless steel workhorse with INTEGRATED scale
- Weighing capacity 2,000 kg, display increments from 200 g to 1,000 g
- Max. Deviation ±1 % of the lifted load
- Scale with LCD display (two-colour, backlit)
Scissor pallet truck type SHW-E /Plus
Nearly rust-free and electric – for maximum hygiene during handling
- Electric operation for lifting and lowering
- Maintenance-free 12 V/70 Ah (C20) battery, integrated charger
- Fork chassis made of V4A stainless steel - corrosion-resistant even when scratched
Scissor pallet truck type SHW-E /Semi
Our robust semi-stainless steel scissor lift truck with operation
- Electric operation for lifting and lowering
- Maintenance-free 12V 70 Ah battery with integrated charger
- Fork chassis made of V4A stainless steel - insensitive to rust formation from scratches
Scissor pallet truck type SHW-M / Plus
The robust one for sensitive working environments with manual operation
- Manual operation with 4 selectable positions (normal lift, fast lift, neutral, lowering)
- Forks made of V4A stainless steel - insensitive to rust formation from scratches
- Drawbar, scissor legs, pump piston, handle and release lever made of V2A stainless steel
Scissor lift truck type SHW-M /Semi
Our semi-stainless scissor lift truck with manual operation
- Manual operation with four positions (normal lift, fast lift, neutral, lowering)
- Forks made of V4A stainless steel - rustproof even if scratched
- Drawbar, axles and wheel holders made of stainless steel, other parts chromite-treated
Electric pallet truck type E-GHW 1800
Electric helper for ERGONOMICALLY safe transport
- Electric drive with control unit and safety switch in the drawbar
- V4A stainless steel forks with battery compartment, rust-proof even when scratched
- Chassis made of V2A stainless steel, chain and roller parts made of steel, other components passivated
Pallet truck type GHW 2000 -100% EX
The ATEX-compliant pallet truck for explosion-proof areas
- Robust construction, precision workmanship
- Forks made of V4A stainless steel - rust-proof even when scratched
- Pump and other components made of V2A stainless steel
Pallet truck type GHW 2000 -100%
The workhorse made of 100 % stainless steel for sensitive working environments
- Robust construction, precision workmanship
- Forks made of V4A stainless steel - rust-proof even when scratched
- Pump and other components made of V2A stainless steel
Pallet truck type GHW 2000 -Semi
The workhorse for continuous professional use in hygiene areas
- Forks made of V4A stainless steel, scratch-resistant against rust
- Acid-resistant stainless steel components: Fork carriage, drawbar, wheel forks, swing arm, pressure plate
- Hot-dip galvanised pressure bar, chromite-treated pump
Stage-work table Highline, Type SAH-R
ERGONOMIC STAGE WORK TABLE MADE OF HYGIENIC ROUND tube
- Fully welded execution made of stainless steel
- Stainless steel table top with rear 100 mm backsplash in 1.5 mm material thickness
- Table top, underneath reinforced with surrounding square tube profile frame
Stage-work table Highline, Type SAH-B
ERGONOMIC STAGE WORK TABLE MADE OF HYGIENIC ROUND tube
- Fully welded execution made of stainless steel
- Stainless steel table top with rear 100 mm backsplash in 1.5 mm material thickness
- Table top, underneath reinforced with surrounding square tube profile frame
Waste bin for perforated wall type ABH
FOR DISPOSAL OF WASTE ON Perforated WALLS
- Suitable for square perforation in a 30 mm grid
- Simple installation by hooking in the rear tabs
- Sheet metal construction made of stainless steel, # 1.5 mm
Document holder for perforated walls type DHA-LW-DIN
FOR STORING DOCUMENTS ON perforated walls
- Suitable for square perforations in a 30 mm grid
- Simple assembly by hooking in the rear tabs
- Strong hold thanks to stainless steel fastening screw
Bucket drip holder type EAH-LW
Holder for drying buckets For MOHN perforated walls
- Suitable for square perforation in 30 mm grid
- Simple assembly by hooking in the rear tabs
- Strong hold thanks to stainless steel fastening screw
Base plate for perforated wall type GP
For MOHN perforated walls/tool walls
- Suitable for square perforation in 30 mm grid
- Simple assembly by hooking in the rear tabs
- Strong hold thanks to stainless steel fastening screw
Retaining rail for open fronted storage box type HSK
For MOHN perforated walls/tool walls
- Suitable for square perforation in 30 mm grid
- Simple assembly by hooking in the rear tabs
- Strong hold thanks to stainless steel fastening screw
Double tool holder type DWZH-GD
For MOHN perforated walls/tool walls
- Suitable for square perforation in 30 mm grid
- Simple assembly by hooking in the rear lugs
- Various mandrel lengths available (projections)*
Tool holder for perforated panel type WZH-GD
For MOHN perforated walls/tool walls
- Suitable for square perforation in 30 mm grid
- Simple assembly by hooking in the rear tabs
- Strong hold thanks to stainless steel fastening screw
Sink unit type SPT-1B-MA-B-SON
Sink unit WITH WALL STANDING COVER and SINKING BASIN
- Robust design made entirely of stainless steel
- Sink unit worktop with rear upstand (40 mm), otherwise with beaded edge on 3 sides
- Sink unit worktop designed with smooth draining board
Collection trolley type SAMW-SON
for transporting CHEMICAL, WASTE OR LAUNDRY BAGS
- Robust design, wall thickness 2 mm
- Container with flanged rim for reinforcement
- Container dimensions incl. rim: W 1000 x D 700 x H 700 mm