Washing systems for smoke sticks
Washing systems for smoke sticks
Smoke-stick washing machine
Type RSW
DRUM-washing-machine for cleaning up to 600 smoke-sticks
- Hygienic-Design through innovative engine-room cladding
- 2 different executions (single-walled or double-walled insulating)
- 2 different capacities of smoke sticks
- Safety switch which stops the drive motor when opening
- Barrel for standard-smoke sticks (1.000 mm)
- Solid drum is made of 4mm thick perforated plate
- Ergonomic working-height: 700mm
- Drum direct drive via low-maintenance offset geared motor
- Stable and durable double-sided drum bearing
- Control takes place via a SIEMENS Logo SPS
No product in the request list!
Please select the desired article on the gray field next to the article no. by clicking the mouse.
Material
Rustproof stainless steel 1.4301
Description
The smoke-stick washing-machine, Type RSW is a solid drum-washing machine for cleaning of standard smoke-sticks with a length of up to 1000 mm. Even the standard execution of type RSW-I cleanes up to 300-500 smoke-sticks.
After the casing-lid as well as the barrel-flap is opened the barrel is filled up to 2/3 of the barrel-capacity with smoke sticks. The dosage of the cleaning detergent is done manually. After that the casing and the barrel-flap are closed again.
The by means of the SIEMENS-SPS-operation pre-adjusted programm starts to run. The barrel spins and freshwater flows in. The filling of the barrel with hot water from site or by means of an optional boiler or steam, is done by impulse within the pre-adjusted time by means of a nozzle-system.
While running, the machine needs a continous inflow of a bit of freshwater.
The circulation of water is used to remove dirt and fat. By means of a filter system the dirt is filtered out before the water flows to the drain. During the complete washing program the water is completely exchanged so that a rinsing with fresh water is guaranteed and no cleaning detergent sticks to the smoke-sticks.
After the pre-adjusted time the actual washing process is finished. Now the ball valve has to be opened that the water can drain from the tank. The barrel spins on in the meanwhile to support the drying process. The end of the whole process is signaled by means of a signal-light.
Technical Data
Power supply | 3 x 400 V/N/PE; 50 Hz |
---|---|
Performance | 0,75 kW |
Drain | DN 50 |
Water connection | G 3/4", min. 1 bar - max. 6 bar, 2-6° dH, 40° C |
Fusing | 16 A |
Weight | 350 kg (RSW-I) resp. 500 kg (RSW-II) |
Water consumption | ca. 400 -500 ltr./ h (depending on model) |
Heater | Hot water on site or steam heated |
Tank capacity | 350 - 400 ltr. (depending on model) |
Drum diameter | 600 / 800 mm (depending on model) |
Loading height | 700 mm (ergonomically favorable) |
Duration of program | 30 - 60 min. |
Temperature range | min. 55° C (without additional heating) |
Steam connection (option) | V-flange 3/4", DN 20, Ø 26,9 mm |