Warehouse clearance

NEW - (On behalf of a customer)
1 piece available

• Type A design, tilting angle: 120°
• For emptying Paloxes measuring 1200x800x800mm
• Paloxes are emptied via the long side
• Includes 500 mm long chute for precise emptying
• Additional holder for containers measuring 950x750x800mm
• Mobile version including 6 m guide rail
• Robust industrial design guarantees a long service life
• Stainless steel surface: glass bead blasted
• Mechanical chain breakage protection, spring-operated
• Lifting column and control box in hygienic design
• Load capacity: max. 500 kg (incl. container)
• Tilt height: 2000 - 2300 mm
• Factory setting: 2300 mm for Paloxes
• Adjustability: 2-stage in 150 mm steps
• Motor power 1.5 kW
• Mains connection: 3x 400 V; 50 Hz
• Protection class: IP 65 (but not motor with protective cover!)
  
   

NEW - Trade fair exhibit 
1 piece available

• Type A version, tilting angle: 120°
• For lifting and tipping 200/300 litre standard trolleys (in accordance with DIN9797)
• Mobile version including chassis
• Robust industrial design guarantees a long service life
• Stainless steel surface: glass bead blasted
• Mechanical chain breakage protection, spring-operated
• Lifting column and control box in hygienic design
• Load capacity: max. 350 kg (incl. trolley)
• Tilt height: 2000 - 2300 mm
• Factory setting: 2300 mm for 200 litre trolleys standard trolley
• Adjustability: 2-stage in 150 mm steps
• Mains connection: 3x 400 V; 50 Hz
• Protection class: IP 65
  
   

TRANSPORT DAMAGE - 1 piece available!
(dent in the front area of the roof)

• Robust industrial design with continuous profile frame
• Stainless steel profile tube frame 40 x 40 x 1.5 mm
• 3-sided closed design, material thickness 1.0 mm
• Enclosure with pitched roof design, 200 mm higher at the rear
• 2 hinged doors at the front
• Doors with ventilation openings at the top and bottom
• Doors lockable with T-handle including profile cylinder lock
• Interior with 4 height-adjustable shelves
• 4 height-adjustable plastic screw feet, +/- 30 mm
• Ground clearance 150 mm

As good as new - 1 piece available!

• Table with manual height adjustment (hand crank on the right)
• Height adjustment range: 850 to max. 1450 mm
• Sturdy, welded industrial design made of stainless steel
• Worktop bevelled and edged on all sides
• Worktop reinforced underneath with square tubular frame construction
• Open substructure in H-shape braced in hygienic design diamond profile
• 1 hydraulic pump with food-safe oil
• Support legs indented 100 mm on all sides with solid rubber levelling feet
• Maximum load capacity: 350 kg / lifting speed: 5 mm/crank U.
• NOT suitable for wet and damp rooms (protection class IP20)

NEW - 3 pieces available!

• Sturdy, welded industrial design
• Table top material thickness: 1.5 mm
• Stainless steel surface: 320 grit, brushed profiles
• Table top made of stainless steel, bevelled on 3 sides, 40 mm bevelled at the back
• Table top reinforced underneath
• Substructure with sturdy square tubular frame construction (40x40x1.5 mm)
• Drawer frame on left-hand side, W: 400 mm
  • 2 drawers, H: 150 mm
  • 1 drawer, H: 300 mm
• Substructure braced in L-shape, longitudinal brace at the rear
• ‘Hygienic design’ (diamond profile 30x30x1.2 mm) for moving appliances underneath
• 6 height-adjustable plastic screw feet, +/- 30 mm
• Ground clearance 150 mm

NEW - 1 piece available!

• Robust industrial design with continuous profile frame
• 3-sided closed version, material thickness 1.0 mm
• Both side walls with 3 star-shaped ventilation openings
• Front side with 2 hinged doors, lockable by T-handle with cylinder lock
• Hinged doors with polycarbonate pane held in rubber seal
• Splash-proof, class IP 54
• Interior divided with partition wall:
• Left compartment with 5 height-adjustable shelves (width 450 mm)
• Right compartment with clothes rail and 3 sliding hooks
• Cabinet with sloping roof, 200 mm higher at the back
• 4 height-adjustable plastic screw-on feet, +/- 15 mm
• Floor clearance 150 mm

NEW - 1 piece available!

• Robust industrial design with continuous profile frame
• 3-sided closed version, material thickness 1.5 mm
• Cabinet with sloping roof, 200 mm higher at the rear
• Inclined roof in the centre with straight exhaust air spigot, DN 100
• Front side 2 hinged doors with vertical handle edging
• Doors with internal roller lock - not lockable with key.
• Doors at top and bottom with ventilation openings
• Interior with 4 removable, perforated drip trays (Ø 10 mm)
• Shelves on narrow sides with notches for optimum air circulation
• Cabinet bottom designed as a drip tray with drain socket and
• Removable water drip tray below drip tray
• 4 height-adjustable plastic screw-on feet, +/- 15 mm
• Feet 20 mm indented on all sides
• Ground clearance 220 mm

NEW - 1 piece available

• The stainless steel workhorse for HIGH-RISK areas
• Completely made of stainless steel including hydraulics
• Open skeleton construction, therefore very hygienic
• Corners and edges are very easy to reach thanks to the open design,
  therefore the pallet truck can be cleaned easily and without problems
• Reliable hydraulics, robust construction
• 3-point manual release with release (lower, neutral, lift)
• Nylon swivel castors & tandem fork castors
• Optimum corrosion resistance
• 3-year guarantee on pump unit*
  *Provided that it is used and maintained correctly!
   

NEW (SALE)
4 pieces available!

• Designed for use in commercial areas (e.g. warehouses) up to 100 m²
• Simple wall, ceiling or table mounting
• Aluminium UV light reflectors inside the device
• 2 × Sylvania BL 368 - highly effective UV tubes
• Staggered UV tubes for greater effectiveness
• Triangular power grid for a larger catchment area
• Quick, tool-free maintenance
• Deep collection tray with curved edges for safe insect collection
• Automatic power cut-off when tray is removed (safety switch)

NEW! (On behalf of a customer)

1 piece available!

Direction of passage: RIGHT to LEFT

• Robust industrial design made of stainless steel
• Length of the brush rollers: 1600 mm
• Sole cleaning and disinfection with rotating brushes
• Automatic brush drive for outward and return journey
• Brushes can be removed WITHOUT tools for maintenance purposes
  ==> ADVANTAGE: quick and easy cleaning of the machine
• Robust, non-slip step for additional safety
• Railing on both sides for safe standing
• Adjustable brush roller running time and dosing quantity
• Canister holder for machine mounting or wall mounting
• Mains connection: 3x 400 V; 50 Hz
• Motor power 0.6 kW

NEW, no damage!
1 piece available

• Housing made of plastic
• For wall mounting
• Individual dosing quantity adjustable in 10 levels
• Large opening for sanitising both hands
• Mains and battery operation possible
• Spray cone covers the entire surface of both hands
• Drip tray with integrated suction pad
• With internal power supply unit (direct connection 230 V)
• Incl. non-manipulable digital counter for checking
• For holding standard 1000 ml containers

TRADE FAIR EXHIBIT - without damage!
1 piece available

• All-round edging 40 mm
• Crimped edge
• Perforated base in 20/20 grid (centre/centre hole)
• Perforation: Ø 10 mm
• 2 handles on the narrow side
   

TRADE FAIR EXHIBIT - without damage!
1 piece available

• All-round edging 40 mm
• Crimped edge
• Perforated base in 35/20 grid (centre/centre hole)
• Perforation: Ø 8 mm
• 2 handles on the narrow side
   

NEW - 10 pieces available

• Sturdy tubular frame construction 50x30x2 mm
• Cleanly welded and first-class stained
• 5 layers, clear shelf spacing 250 mm
• Lowest layer 300 mm above the floor
• Layer type 3 made only for 800 mm smoke sticks (2 mm flat material)
• Total load max. 150 kg
• With 2 push handles on each side
• Open wheel housing
• 6 polyamide fixed castors, Ø 150 mm, centre pair of wheels increased for tilting torque
• Wheel carrier made of 80x40x2 mm profile tube
• Wheels designed for max. 80°C 

NEW - without damage!
25 pieces available

• Rectangular shape
• Shape inside: smooth
• Lid shape: straight
• Capacity: approx. 5 kg
• Length inside: 220mm
• Width inside: 160mm
• Height inside: 150mm

NEW - 2 pieces available

• Easily stacks up to 10 standard trolleys
• Stacking tray in wheel carrier
• Sturdy, welded stainless steel construction
• 6 polyamide wheels, natural, Ø 125 mm
• Tilting moment, therefore can be turned on the spot
• Locking system for on-site padlock
• Supplied WITHOUT castors!
   

NEW - 2 pieces available

• Robust tubular frame made of stainless steel
• 5 shelves/shelves
• Shelves firmly welded in
• Shelves with all-round beaded edge
• Shelf clearance 300 mm
• 2 swivel + 2 fixed castors, rubberised, Ø 150 mm
• Swivel castors with brakes

NEW GOODS - 2 pieces available

• Bracket for wall mounting
• Hygienic design made of stainless steel
• Robust design made of solid material
• Capacity up to 5 pairs of shoes or clogs
• 4 mounting holes, Ø 9 mm

NEW 
1 piece available!

• Wall-mounted version made of stainless steel
• Hygienic Design" with 100 mm pitched roof
• Block of 1 for wall mounting
• Base and hinged door with square perforations
• Lockable with profile cylinder lock incl. 2 keys
• Compatible: suitable for small and large knife baskets
• Incl. storage compartment for aprons or gloves

NEW 
1 piece available!

• Wall-mounted version made of stainless steel
• Hygienic Design" with 100 mm pitched roof
• Block of 3 for wall mounting
• Base and hinged door with square perforations
• Lockable with profile cylinder lock incl. 2 keys
• Compatible: suitable for small and large knife baskets
• Incl. storage compartment for aprons or gloves

NEW - 2 pieces available
ID 22-36021/62

• Basin with cross stroke
• Basin: W 1500 x D 550 x H 400 mm
• Basin rim 20 mm right-angled for stability
• bevelled to the outside, outer corners bevelled
• Drain (1 1/2" AG) at the bottom of the basin at the centre rear
• Basin rear with 600 mm back wall,
• 30 mm thick, with sloping roof at the top
• Stand frame with U-bracing
• Feet indented on all sides

NEW - 7 pieces available
ID 22-36021/61

• Basin with cross stroke
• Basin: W 750 x D 550 x H 400 mm
• Basin rim 20 mm right-angled for stability
• bevelled to the outside, outer corners bevelled
• Drain (1 1/2" AG) at the bottom of the basin at the centre rear
• Basin rear with 600 mm back wall,
• 30 mm thick, with sloping roof at the top
• Stand frame with U-bracing
• Feet indented on all sides

TRANSPORT DAMAGE - 1 piece available!
(dent in side panel)

• Cabinet with 2 compartments á 15 compartments on top of each other
  (Clearance per compartment: approx. H 100 x W 180 x D 18 0mm)
• Compartment width: 200 mm
• Integrated sloping roof (200 mm higher at the back)
• Right-hinged compartment doors
• Outside with embossing for name plate
• Each compartment door individually lockable with cylinder lock
• Substructure on 4 feet
• Ground clearance: 150mm

NEW - 1 unit available!

• Cabinet with 2 compartments á 20 compartments on top of each other
  (Clearance per compartment: approx. H 70 x W 180 x D 180 mm)
• Compartment width: 200 mm
• Integrated sloping roof (200 mm higher at the back)
• Right-hinged compartment doors
• Outside with embossing for name plate
• Each compartment door individually lockable with cylinder lock
• Substructure on 4 feet
• Ground clearance: 150mm

EXHIBITION ARTICLE - 1 piece available!
(scratches on the doors)

• Space-saving locker made of stainless steel
• 8 compartments with compartment width of 150 mm each
• Integrated sloping roof (200 mm higher at the back)
• Doors of each compartment hinged on the right, mounted in pivot pins
• Outside with embossed nameplate
• Each door individually lockable with cylinder lock
• Inside of door with box section reinforcement for maximum stability
• Each compartment with hat shelf, clothes rail and 3 sliding hooks
• Smoothly sweepable compartment shelves for easy interior cleaning
• 4 height-adjustable feet (+/- 15 mm)
• Ground clearance 150 mm

EXHIBITION ARTICLE - 1 piece available!
(Scratch on the side)

• Robust construction completely made of stainless steel
• 2 compartments with 10 compartments on top of each other
• Central door at the front with T-handle locking system
  (For easy loading of all compartments at the same time)
• Compartment dimensions: 10 doors per compartment: W 295 x D 475 x H 126 mm
• Compartment doors smooth, with label frame
• Doors hinged on right, mounted in pivot pins
• All doors with profile cylinder lock incl. 2 keys each
• Integrated sloping roof, 200 mm higher at the back
• Smooth sweepable shelves for easy interior cleaning
• Version with 4 height-adjustable feet
• Ground clearance 150 mm