• As wall protection in wet areas, since HDPE does not absorb moisture and is resistant to most cleaning and disinfecting agents.

• As a protection against scratching in the cooling area, since HDPE is resistant to -30 ° C and also retains its properties of elasticity and the possibility of absorbing impact energy up to these temperatures

• As wall protection in food processing plants, as HDPE does not absorb water through the closed surface and bacteria, compared to wood, do not find a suitable nutrient base to multiply, is resistant to most cleaning and disinfecting agents, is easy to wipe clean

• As start-up protection and anti-skid protection in the bearing, since HDPE can absorb high impact forces (pallet trollies, forklifts, etc.) as a solid material without splintering or breaking

• Thanks to material thicknesses of up to 50mm as protection against bumpers, even in particularly stressed areas such as port facilities, truck loading zones or in the water industry

• For heavily used areas such as commercial and industrial tractors

• In highly frequented buildings such as sports centers, schools, public buildings, hospitals and nursing homes, restaurants, airports, railway stations

Wall protection profiles made of the material polypropylene, nylon or polyamide are often mistakenly described. Although these plastics are conditionally suitable for use as wall protection systems, they are generally more expensive than polyethylene.

HDPE or polyethylene is considered a physiologically sound material, which means that it is suitable for the food processing industry. The material is characterized by the fact that it absorbs no moisture and no sources such as in wood occur.

Because the polyethylene is not an organic material, it does not serve as a breeding ground for bacteria.
In addition, polyethylene has a so-called low-polar surface, which makes it difficult to stick dirt. Labeling or labeling is therefore difficult and only possible after pretreatment of the surface.

With this wall protection all dimensions, profiling and colors required according to customer requirements can be selected. This results in many design possibilities, and can thus also be adapted to the customer's corporate design.

E wall protector of Nierolen is custom made according to customer requirements. The profiles are standard 2060 mm long and can be manufactured up to 1060 mm in height. Strengths of 10 - 50 mm are possible and available in 16 different colors. For larger orders, all special colors are also possible. The profiles can also be welded homogeneously and can thus also be produced beyond the raw dimension.

There are four versions for this wall protection:

• Visible screw connection
(using stainless steel screws)
• Almost invisible screw connection
(using stainless steel screws and plugs)
• Fully invisible screw connection
(by means of a wall-side clamping profile and a back-side chamfering in the profile)
• bonding


Depending on the substrate and the installation site, the mounting options are as follows:

• Masonry without hygiene requirements: Visible screw connection
• Masonry with hygienic requirements: almost invisible or completely invisible screw connection
• Panel: any type of screwing
• Glass walls: gluing
• Metal doors: gluing, riveting or screwing, as required
• Walls with wet cleaning: screw mounting and silicone joint

Hygiene is essential in food processing areas. All materials used must be hygienically clean, rust-free and easy to clean. Our HDPE bumper protection meets all these requirements. Due to the inorganic material, HDPE does not provide a breeding ground for bacteria and fungi. Furthermore, HDPE does not absorb moisture and is resistant to most cleaning and disinfecting agents.

HDPE fulfills the flammability class B2, which means that the material is normally flammable, so in the area of escape routes a different material must usually be selected in the area B1 (hardly inflammable) or A1 (non-flammable).

All colors are possible from a material quantity of approx. 2t and after sampling. Thanks to the in-house production, the customer can react quickly.

The assembly can be offered by us or one of our partners.

Depending on the order size and supplier country, we can deliver within two up to six weeks, after clarification of the details.

Special versions generally have a longer delivery time.