Spare parts

- Drill hole (8.5 mm for grub screw)
must be made on site!

Dimensions: L 130 x D 25 mm

- 400 mm body length
- with field trimming
- 25/55/195 mm total diameter
- M 30 thread on one side
- Trimming: Nylon 1.5 mm !!!!
- Colour: blue
- without bearing shaft !
- without cap screw !

(Illustration shows brush roller, pre-assembled (optional) with cap screw and bearing shaft)

Service-Video: Changing the brush rollers
https://bit.ly/service-video_brush-rollers

- 400 mm body length
- with field trimming
- 25/55/195 mm total diameter
- M 30 thread on one side
- Trim: Nylon 1.5 mm
- Colour: red PA6
- without bearing shaft
- without cap screw

(Illustration shows brush roller, pre-assembled (optional) with cap screw and bearing shaft)

Service-Video: Changing the brush rollers
https://bit.ly/service-video_brush-rollers

- 400 mm body length
- with dense field trimming
- 25/55/195 mm total diameter
- M 30 thread on one side
- Trimming: Nylon 1 mm !!!!
- Colour: green
- without bearing shaft !
- without cap screw !

(Picture shows brush roller, pre-assembled (optional) with cap screw and bearing shaft)

Service-Video: Changing the brush rollers
https://bit.ly/service-video_brush-rollers

DIN 912-A2
for brush roller
- Drill hole (8.5 mm for grub screw)
must be made on site!

for sensor 99870115 (Solestar)

- Straight plug
- Connection: 4-pin,
- M12 plug
- Cable length: 5 m
- Colour: black

Technical data
- 250V AC, 4A

for cleaning agent canisters

- Max. Operating pressure: 125 PSI

- Motor side with groove for split pin
- with turned collar!
- External hexagon Brush side
- without split pin and disc

Dimensions: L 145 / D: 18.85 or 14.07 mm

- Motor can be used left + right
(change of direction by
by customer conversion of the flange
easily and at short notice)
- Painted version

Technical data
- Voltage: 230/ 400V - 1.14 / 0.65 A
- Frequency: 50 Hz
- Protection class: IP 55
- RPM: 2780/70min-1
- Reduction ratio: 40:1
- Power: 0.25 kW

for pass-through sole cleaning systems
from year of construction 04/2012
(not compatible with older models!)

- PKZM0-4 XTPR004BC1
- Rotary actuation

TECHNICAL DATA:
Voltage: 400V/50Hz/3ph
Rated motor power: 1.5kW
Rated continuous current: 4.0A
Overload release: 2.5 - 4.0 A

- 24 V version
- M18 reflex switch
- Operating range/sensing range: 500 mm
- Supply voltage: 10...30 V DC
- Connection: M12 plug, 4-pin
- PNP 200 mA

- Coil design AKK
- Spigot angle 180°
- Function: de-energised closed
- Installation position: any
- Medium: water
- Flow direction: marked by arrow on housing
arrow on the housing
- Connections: Inlet - external thread G 3/4"
Outlet - grooved connection Ø 10.5 mm
- with steel flange

Test mark:
Standard versions: ÖVE/ VDE
(tested according to EN 60730)

Materials:
- Valve body: PA 6 30 % GF
- Core guide sleeve: PA 6.6 30 % GF
- Coil sheathing: heat-stabilised PA 6 with
with increased thermal conductivity
- Solenoid core and spring: stainless steel
- Diaphragm and flow regulator: EPDM
- Dirt strainer: POM
- Enamelled copper wire: Insulation class H
according to VDE 0530