Swinging door
Type PT-N 90 INDUSTRIAL

Material

Polyethylene HDPE 500

dimensions

Single leaf version: max. W 1500 x H 3000 mm
Double-leaf version: max. W 3000 x H 3000 mm

Advantages

•     High functionality
•     Perfect, patented window technology
•     Attractive design
•     Physiologically impeccable
•     Homogeneous staining
•     Extremely shock and impact resistant
•     Optimized price-performance ratio
•     Rounded corners and edges

Description

The solid, continuous reinforcing panel of the "industrial version" gives the swing door extra stability. The fittings are harmoniously integrated into the reinforcing panel.

Standardausführung

• Door leaf
  made entirely of polyethylene (HDPE 500), an extremely hard-wearing and impact-resistant hard plastic; the door leaf thickness is 15 mm; The reinforcing panel, which is also made of polyethylene, gives the swing door stability and also serves as a receptacle for the fittings. The use of the same materials avoids stresses that can arise through the use of different materials (eg reinforcing panel made of stainless steel) and increases the functionality of the door. The fittings are harmoniously integrated into the solidly worked shoulder strip (made of polyethylene) and thus meet the highest hygiene standards
  
  2-leaf doors come standard with a center overlap of transparent PVC. The overlap starts 1000 mm from the top of the finished floor.

  Optionally, a continuous center overlap can be delivered.

• Fitting
  Double-sided spring belts made of special plastic with stainless steel bolt and tension springs, with integrated 90 ° locking; in an ordinary passage through the swing door close the doors automatically. Locking takes place only when the door leaf is opened slowly over 90 °. A light touch on the door brings the door back to its original state. Stainless steel bolt and tension springs additionally ensure a high load capacity.

  Optionally, the swing doors can also be equipped with stainless steel straps WITHOUT 90 ° locking.

• Window
  made of impact-resistant polycarbonate (material thickness 3 mm), diameter 360 or optionally 500 mm; the porthole is pressed directly into the door leaf using a patented process. Additional fasteners such as rubber clamping profiles or PE retaining strips are not required.

• Center overlap of transparent PVC
  The overlap starts 1000 mm from the top of the finished floor.

Options

• Window, rounded (Ø 500 mm)
• Stainless steel spring bands without 90 ° locking
• Floor deflector on request
• Asymmetrical partition on request
• Impact protection profile on request
• Tube-way skirt on request
• 3-piece U-form stainless steel frame for PU panels
• 3-piece U-form plastic frame for PU panels
• Available as a design version in 6 appealing versions

Mounting informations

The doors can be screwed directly over the plastic spring band to all common finished carvings. For optimal distribution of the tensile forces, a base plate made of stainless steel is enclosed with the wall mounting. A separate frame or a frame with masonry walls is not required. For installation in panel walls, we generally recommend the use of a U-profile frame made of HDPE 500 or stainless steel.