Floor drains (one-piece), square
Floor drains (one-piece), square
Floor drain
Type Industry-E 1T
HYGIENIC FLOOR DRAINS IN square CONSTRUCTION
- Drain body 1-part, square design
- Drain body without insulating flange
- Edge reinforcement made of solid stainless steel
- Outlet optionally vertical or horizontal
- Loading capacity dependent on cover
- Floor drain consisting of:
- Drain body
- Dirt basket
- Odor trap (V2A)
- Cover (Standard: Non-slip grid)*
- Covers in other load classes optionally available
No product in the request list!
Please select the desired article on the gray field next to the article no. by clicking the mouse.
* Item no. 62.00.11.04 (163 x 163 mm), item no. 62.00.11.18 (213 x 213 mm) or item no. 62.00.11.19 (265 x 265 mm) in load class: L15 (15 kN)
Material
Stainless steel 1.4301 (V2A), AISI 304
All elements are welded in an argon shield and then etched, which ensures high quality of the welds.
areas of application
Places where hygiene requirements, corrosion resistance and durability play a key role, such as in food processing industries, pharmaceutical and cosmetics industries, chemical plants, canteen kitchens, hospitals, public buildings, etc.
amount of waste water
The amount of waste water generated determines the nominal diameter of the drain outlet. Depending on the amount of waste water, the corresponding nominal size DN 75, DN 100 etc. should be selected.
Load class
The traffic load at the installation site of the floor drain is decisive for how stable the corresponding cover must be.
The drains and covers are divided into load classes K3 (3 kN), L15 (15 kN) and M125 (125 kN) within the building according to the PN-EN 1253 standard, depending on the installation location. Load class K3 includes areas where there is only pedestrian traffic, such as toilets.
Load class L15 is used in rooms used for commercial purposes with low traffic density. Areas in which vehicle traffic (forklifts) takes place, e.g. industrial halls, load class M125 is used.
If in doubt, always choose the next higher class.
OptionS
- Sheet grid cover, load class: L15 (15 kN)
- Bar grid cover, load class: M125 (125 kN)
- Plate grid cover, load class: M125 (125 kN)
- Drain body in stainless steel execution 1.4404/ V4A
- Drain body with outlet DN75
Technical Data
| Drain | DN75/ DN110/ DN160 |
|---|---|
| Max. water outlet | 3 ltr./s. |
